MYCRONIC MYC50 Conformal Coating System

Popis produktu:

X,Y AXIS Z AXIS
X, Y speed: max 800 mm/s Z axis speed: max. 300 mm/s
X, Y acceleration: max. (0.8 g peak with s-curves) Z axis acceleration: max. (0.3 g peak with s-curves)
X, Y repeatability: ± 25 um, 3 ? Z axis repeatability: ± 25 um, 3 ?
X, Y drive mode: servo motor, ball screw Z axis drive mode: servo motor, ball screw
D AXIS
Rotation angle: ± 90 degrees Valve rotation axis
Repeatability: ± 0.1 degree Rotation angle: ± 30 degrees
Drive mode: cylinder Repeatability: ± 0.1  degree
ONE WORK STATION TWO WORK STATIONS
Single valve max: 650 × 450 mm Single valve max: 450 x 450 mm
(V-5000 + V-420A ) max : 560 × 450 mm V-5000+V-420A max: 450 x 450 mm
V-5000 tilting module + V-420A max : 560 x 380 mm V-5000 tilting module + V-420A max: 450 x 380 mm
Max. clearance above and below PCB: 100 mm
BOARD HANDLING     FACILITY REQUIREMENTS
Drive mode: stepper motor, stainless steel chain Power: 220V, 2.5KW, 16A, 60 Hz
Payload capacity: 5 kg Air supply: 80 psi (5.5 bar)
Min. board/carrier width: 40 mm System footprint: 1364 × 1290 × 1638 ± 50 mm (D × W × H)
Max. board/carrier width: 500 mm Machine weight: 900 kg
Max. board/carrier length: 650 mm (1 station)  
                                                  450 mm (2 stations)
Standards compliance: CE UL
Exhaust volume: diameter 200 mm
                                volume  ? 13m2/minute Min. board edge: 3 mm
Width adjustment drive mode: stepper motor
Communication signal: SMEMA
CONTROL SYSTEM FLUID DELIVERY METHODS
Computer: IPC, LCD monitor, keyboard V-5000 three-mode spray valve
Operating system: Windows 7 V-420A precise needle valve
Control software: Axxon coating software V-5400 ? lm coater
CCD resolution: 30W
STANDARD FEATURES OPTIONAL FEATURES
Industrial computer and software and monitor   Valve type and ? xture
X, Y, Z  axis and motion platform Conveyor module / bottom return conveyor
Conveyor auto-width adjustment               Cleaning platform
Ultraviolet and white light  Pressure tank supply module
Safety interlock                                              Low liquid alarm module
Audible alarm Circulation heating module
Exhaust port                                                  Pump supply module
Fluid supplying pipe                                                      Laser height detection module
Tube cleaning                                              Laser fan width adjusting control (V-5400)
CCD camera Needle calibration module
Exhaust fan
Wind speed monitoring module
Four direction tilting module (for V-420A and V-5000
series valve)
Electric tilt and rotate module (for V-420A and
V-5000 series valve)
2D barcode reader module
w
MOTION SYSTEM
DISPENSING  AREA